Type Sets And Holders - Interchangeable Type Sets - 07 Series - Imperial

07 Series Imperial Sharp Faced Type Specifications

Safety Note: We recommend the use of appropriate safety protection. Safety glasses and gloves should be used at all times.

Type is sharp faced which leaves a crisp indent in the material being marked.

For Low Stress Type Sets click here

Character Height (CH)

Blank Size

Set with Holder
Part Number

Set without Holder
Part Number

Individual Characters

.040"

1/4"

1/16"

7/8"

TIFH010

TIF010

TI010-(*)

1/16"

1/4"

1/16"

7/8"

TIFH015

TIF015

TI015-(*)

5/64"

1/4"

5/64"

7/8"

TIFH020

TIF020

TI020-(*)

3/32"

1/4"

3/32"

7/8"

TIFH025

TIF025

TI025-(*)

1/8"

1/4"

1/8"

7/8"

TIFH030

TIF030

TI030-(*)

5/32"

1/4"

5/32"

7/8"

TIFH040

TIF040

TI040-(*)

3/36"

1/4"

3/16"

7/8"

TIFH050

TIF050

TI050-(*)

1/4"

3/8"

1/4"

3/4"

TIFH060

TIF060

TI060-(*)

3/8"

5/8"

3/8"

TIFH100

TIF100

TI100-(*)

Type Sets contain 100 characters plus spacers, tweezers, hexagon key and hand holder (optional). The illustration to the left shows the specific characters contained in these sets. Single pieces of type are also available. These sets are supplied in a durable polymer case with a divider grid to assure components are kept in order.

Accessories & Related Products

Hand Held Type Holder specifications

PRYOR Hand Held Type Holders (to be used with a hammer)

Machined specifically for use with Pryor Interchangeable Steel Type.

Provides a safe and convenient way to use Interchangeable Steel Type by hand and hammer.
Hardened for years of service.
Type holders are nickle plated to resist corrosion.
Several standard models available for use with the specific Pryor type you have.

Machine Type Holder specifications

PRYOR Machine Type Holders (to be used in a press)

Machined specifically for use with Pryor Interchangeable Steel Type.

Designed for use with Pryor type in Pryor Percussion Presses plus can be adapted to a wide range of other brand marking presses.
Knurled shank available allowing for use by hand and hammer.
Type holders are nickle plated to resist corrosion.
Several standard models available for use with the specific Pryor type you have.

Low Stress Type Set specifications

PRYOR Low Stress Type Sets

Sizes available are 1/8"" & 3/16" in character height.

For applications that requrie only lower stress levels be introduced into the component being marked.
Often required for use in the Aerospace, Nuclear, Oil and Gas Industries.