Sharp faced type sizes available ranging from .040” up to 3/8” in character height.
Simply place a series of characters into the holder to give clear marks of consistent depth.
Characters hardened to 59-63 Rockwell C to give optimum life and safety in use.
Nickel plated characters resist corrosion.
Type can be used in Pryor standard hand holders (to be hit with a hammer) or Pryor standard machine holders (to be used in a press).
Characters are sharp faced to leave a clear, legible impression. Lowstress characters available where applications dictate; generally the aircraft, nuclear or gas industries.
Sets include multiples of each character and are available either with or without a hand holder. For specifics on characters included in each set see product specifications.
Individual replacement characters are available for all type sizes. This minimizes your cost in keeping sets up-to-date with high quality type. No need to re-purchase an entire set.
Sizes available are 1/8”” & 3/16” in character height.
For applications that require only lower stress levels be introduced into the component being marked.
The basis of Lowstress type is that the character crown, instead of being sharp faced, is rounded to give a ‘softer’ impression into the component being marked. This helps to reduce stress concentration at the bottom of the indentation.
Often required for use in the Aerospace, Nuclear, Oil and Gas Industries.
Available in two character styles: Round Faced continuous line character or DotStress dot formation character.
Characters hardened to 59-63 Rockwell C to give optimum life and safety in use.
Nickel plated characters resist corrosion.
Hand held & machine type holders available for 1/8” size; hand held holder available for 3/16” size.
Individual replacement characters are available for all type sizes. This minimizes your cost in keeping sets up-to-date with high quality type. There is no need to re-purchase an entire set.
